The Auto Finesse Imperial Acid-Free wheel cleaner contains a powerful blend of cleaning agents and degreasers to separate the brake dust and road dirt from the wheels on contact. Its high-foaming formula makes light work of a heavy task, and will take your rims from shameful to sparkling in a matter of minutes.

Its highly concentrated formula is economical, safe to use on all modern coated wheel finishes, and is gentle enough that it can even be used for cleaning tyres.

500ml
Acid Free
High Foaming
Safe on all modern coated wheel finishes

Application:

Cleaning your wheels is generally the first job you tackle when detailing a car or bike, so start by taking some time and laying out the tools you will need. You will need two types of brushes; a dedicated wheel brush for the barrels of the wheels, and a smaller detailing brush for the faces and wheel nuts. You will also need a separate bucket to rinse out your brushes. Lastly, you will need a Microfiber Drying Towel to dry off the wheels, and of course our Imperial Acid-Free wheel cleaner.

Begin by using a free-running hosepipe or pressure washer to remove any loose contamination, and spray Imperial wheel cleaner directly onto the wheels and tyres, thoroughly saturating all exposed surfaces. Allow the wheel cleaner product to dwell momentarily while it begins to soften the brake dust and road film. Start with the wheel brush, cleaning in between the spokes, and reaching into the barrel of the wheel to break loose as much of the brake dust as possible.

Finish by using the detail brush to clean the face and lips of the wheels, as well as around the wheel nuts. Also, take this opportunity to thoroughly scrub the tyres, removing the old dressing in preparation for a new coat. Afterwards you can rinse or pressure wash off the remaining brake dust and cleaner residue.

During the wheel cleaning process, make sure to regularly rinse out your brushes in the bucket you assigned for wheel duty, as this will minimise the chance of scratching the wheels.

If iron or tar based fallout is still present after cleaning with Imperial wheel cleaner, try the Auto Finesse Iron Out, and/or Auto Finesse OliTARate.

Imperial is safe to use on all painted, clear-coated, and powder-coated alloy wheel finishes. Chrome, bare polished aluminium, or anodised finishes should be treated with extreme caution. These types of wheel finishes are most common on aftermarket wheels, and should be cleaned with a mild exterior all-purpose-cleaner like Auto-Finesse Citrus Power.

Do not apply Auto Finesse Imperial wheel cleaner if the wheels are warm, in direct sunlight, or the ambient temperature is below 0-degrees Celsius.